Among the features of the PSP we find that the screen measures 4,3 inches, the screen resolution is 48ox272 contains 16 million colors.
As it can be said that it has 32MB RAM of main memory, the sound of this console is quite clear compared to other consoles. Its IEEE 802.11b Wi-Fi connection helps you connect to play from 2 to 16 people simultaneously.
Also, we can mention that the new PSPs have small 6cm discs that can store up to 1,8GB, which is why we like games as a multimedia download.
As for the PSP battery, it can be charged via a charger ; or from a direct USB cable to your computer, it should be remembered that your PSP must be fully charged, so that it can be kept up to date.
How to charge a PSP from a USB cable
To start with, you have to keep in mind a number of tips: first, this method is not compatible with the PSP 1000 models. Your PSP must be turned on so that it can recharge via the USB cable.
You will not be able to play on the PSP while it is charging. Once these points are cleared up, check if you still have some battery left to begin the procedure.
Once the PSP is turned on, press on the initial Settings menu, to do this you have to go to the left side of the initial menu. Then turn on USB charging, which you can find in the system's Attachments menu, then your PSP can be charged via the USB cable.
To continue, you need to activate the Automatic USB Connection, which you will find in the menu exactly in the part bottom of USB charging.
In the next step you need to install the mini USB cable on the PSP, the location will be on the top device. It is important to note that the PSP equipment has a 5-pin mini USB type B port; for this reason you can connect any cable that meets these characteristics to your PSP.
Now, install the other end of the cable into an electrical outlet or a computer equipped with a USB adapter. But first you have to keep in mind that in order to charge the PSP, it must be turned on just like the computer.
advice
Watch until the power indicator does not turn orange. You should know that the light will flash green at first and then turn orange.
Therefore, if that happens, it means that the equipment è actually in office. But, if at no time the light turns orange, you need to check that the adopter is installed correctly or the battery of the PSP is installed correctly. This process to charge the device takes 6 to 8 hours so that it can fully charge; as that system is slower, but so you can use it for a longer time.
Finally, we can advise you on how save battery power: You can decrease the brightness of the PSP screen first and also disconnect the wireless connection. We hope this post has been of great help to you; We would also like you to leave us your opinion. Also, you can share this information with your friends and family.
